Step into Wølfgar, the world’s most advanced winter cycling boot. We’ve combined decades of winter cycling experience with NASA-grade insulation materials for a boot that keeps feet warm and dry down to -25ºF. Wølfgar is a boot worthy of singletrack sessions or multi-day expeditions in the harshest winter weather. - Our lightweight three-piece proprietary bottom assembly is compatible with both flat pedals and 2-bolt cleats, and features a rubber outsole with microglass lugs for traction on ice - Waterproof materials and construction keep the elements out, while aerogel under the foot and over the toe block frigid air - On the inside, Wølfgar’s reflective thermal lining retains warmth, and a removable wool and faux-fur liner wicks moisture and insulates

From recent road converts, to sultans of gravel speed, the new S-Works Recon delivers pavement-bred performance to the gravel discipline. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is an intentional fit, that's stiff, comfortable, and tunable—to put the power down. Inside and out, Body Geometry technology is baked into the S-Works Recon. Driven by nearly two decades of development and validated by data, we ensure there is no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as in line with your knee and hips. - High-density pontoons and new shims allow riders to tune their pedal interface for maximum efficiency and a road-like pedal platform - Features Body Geometry technology by way of the Varus Wedge, a Longitudinal Arch, and Metatarsal Button - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Using an Internal I-Beam adds stiffness and strength—eliminating the need for additional bracing and allowing the shoe to stay extremely lightweight - Zoned reinforcement across quarter and forefoot maximizes support while the updated BOA® routing improves lockdown—eliminating the need for a toe strap - Additional 3mm, 6mm, and 9mm pontoon shims for leg length discrepancy and cleat stacker available through Specialized Rider Care. - For a wider fit — the new base plate is 4mm wider than the standard width (8mm wider than S-Works Recon Mountain Bike Shoes). - 280g for a size 156

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you’ll forget you’re wearing it. Leveraging data science, we refined every detail of the S-Works Torch’s upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL biomechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering fit zones to create a disappearing fit on the foot. - Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. *** IMPORTANT FOR WIDE FIT*** the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

Whether it's a sweltering climb at the Vuelta or a toasty afternoon in your hometown, we developed the S-Works 7 Vent to keep you comfortable on even the hottest days. With new features like the Vented Mouthport toe box and an all-new engineered mesh upper, the S-Works 7 Vent delivers exceptional ventilation and aides in sweat evaporation. Pair that with World-Tour-proven features like our Body Geometry Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button, the PadLock heel, a FACT Powerline carbon outsole, and machined alloy BOA S3-Snap dials, and you're set for any ride or race, no matter how high the mercury rises. For power transfer, our PadLock heel construction cradles the heel to ensure optimal power transfer. In fact, its been scientifically-proven to improve acceleration. Pair that with two independent, alloy BOA S3-Snap dials backed by the BOA Lifetime Guarantee, and you can fine-tune your level of foot-hold on-the-fly. The Vented Mouthport toe box pulls air in through the front of the shoe and channels it around your feet, while the entirely-new, engineered mesh upper and tongue let that air flow freely throughout the shoe, aiding in both cooling and sweat evaporation. Along with the engineered mesh in the upper, we added a layer of Dyneema Mesh to keep strong hold of your foot, ensuring pro-proven power transfer. The key to more comfort, fewer injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry Features, Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Non-slip, replaceable heel tread with internally recessed screws for security. - Three-bolt cleat pattern fits all major road pedals. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - Uses the same 66-gram FACT Powerline carbon outsole found in our EXOS line. With its mesh-covered ventilation holes, the sole furthers the shoe's cooling properties, all while dropping weight to 233 grams (1/2 pair, Size 42).

When the moment comes for an attack in the hills, a long solo move, or a full gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world’s best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced tongueless sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It’s 1% faster than any shoe we’ve ever made, and at the finish line, that’s all that matters. - The key to more comfort, less injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features—Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)

When the moment comes for an attack in the hills, a long solo move, or a full gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world's best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced toungless sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It's 1% faster than any shoe we've ever made, and at the finish line, that's all that matters. - The key to more comfort, less injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features-Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)

When the moment comes for an attack in the hills, a long solo move, or a full-gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world's best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced tongueless sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It's 1% faster than any shoe we've ever made, and at the finish line, that's all that matters. - The key to more comfort, fewer injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features: Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic mesh and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)

The Garneau Klondike M3 Cycling Boot offers ultimate protection and keeps feet warm on long winter rides. - High volume fit last - Cordura 1680D with 400 g ThinsulateTM to resist cold temperatures down to -20°C/-4°F - Boa® IP1 with silicone elastic and neoprene opening with YKK zip - VIBRAM® DURATREK outsole - 3-layer construction insole with felt, 3 mm PE and foil

The all-new S-Works Torch Lace delivers the timeless, refined style of a lace-up with an unprecedented level of efficiency, lightweight, and comfort thanks to Body Geometry. It all adds up to a shoe that disappears on your foot, yet begs to be seen. Like every shoe we make, the S-Works Torch Lace starts with Body Geometry - identify a problem, solve it with design, and validate it with science - to improve comfort, increase performance, and reduce the chance of injury for every rider. Comfort: The S-Works Torch Lace utilizes our new forefoot shape - 4mm wider than the S-Works 7 - based on extensive 3D foot scans and Retül data. The upper features remapped zonal layering throughout. It remains incredibly supple to adapt to different foot shapes, yet won’t stretch over a long day in the saddle to ensure a secure, consistent fit. An asymmetric heel counter reduces hard touch points against the ankle and still delivers knee stability validated by our Human Performance team. Efficiency: Every Body Geometry shoe optimizes ankle, knee, and hip alignment for a stable and pedal stroke with our patented Varus Wedge, a 1.5mm outward tilt to the outsole. Thanks to the lightweight retention of laces and watching every gram - from the carbon outsole to the upper material - the S-Works Torch Lace weighs a feathery 200 grams in size 42. With an internal ‘I-Beam’ the carbon outsole provides the ideal stiffness-to-weight ratio for big efforts without adding excess grams, optimized by working with the best riders in the world. Style: Beauty is in the eye of the beholder, and those that see the S-Works Torch Lace will get to admire them as long as they can hang on your wheel. With classic lines and understated colorways the S-Works Torch Lace is at home whether you chase finish lines or mountain tops before sunset. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Laced closure maintains the most opportunity to customize fit along the entire foot. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - Approximate weight: 200g (1/2 pair, Size 42).

45NRTH Wölvhammer BOA® winter bike boots make year-round riding possible, with high-tech design and materials that stand up to snow and ice. Get yours here. Most winter boots aren't made for riding bikes — they're too warm in some spots or not warm enough in others, and they're not optimized for pedaling. Wölvhammer BOA® boots are the answer for winter riders. Designed and built for the rigors of real winter riding (deep snow, slippery ice, cold pedals), These winter bike boots are rated for comfort from 0º to 25ºF (-18º to -4ºC), slotting between our Ragnarök and Wølfgar boots. Take on winter rides with Wölvhammer. - Rated for 0º to 25º F / -18º to -4º C comfort - The BOA® Fit System delivers micro-adjustable, precision fit engineered to perform in the toughest conditions - Hook-and-loop upper strap helps secure boot - Removable synthetic liner boot for quick drying - Waterproof breathable membrane to manage moisture - 200 g of Primaloft® insulation - Aerogel insulation underfoot blocks the chill from snow, ice, and cold pedals, and allows for insoles without sacrificing warmth - Non-slip sole for walking on icy surfaces - Compatible with flat and clipless pedals

Originating from the conceptual standpoint of a mountaineering boot, the new and evolved Wölvhammer is lighter, more comfortable, and grippier. The overhauled design features a removable synthetic liner and a three-piece proprietary bottom assembly compatible with flat and clipless pedals. When the cold winter creeps in, Wölvhammer has you covered. - Removable synthetic liner boot for quick drying - 3-piece proprietary bottom assembly is lighter, warmer offers more walking traction - Aerogel insulation blocks cold cleats and allows use of preferred insoles without sacrificing warmth - 0 to 25F / -18 to -4C Comfort

No matter if your feet are thin, medium or wide, Garneau's X-Comfort zone technology prevents numbness by extending the shoe's edges if needed. Having an internal lace system and a tight opening on the shoe's top avoids mud from sticking into the Baryum's fastening system. Get the best of both worlds with a stiff carbon outsole covered in rubber for optimal grip in any conditions. Heels and toes are protected with extra reinforcements so that you can head to the craziest trail sections with confidence. Technical Details - Shoe Technology: Dual X-Comfort Zone and Power Zone technologies - Shoes Weight: 12.7oz / 360g (size 42) - Outsole: Carbon and rubber outsole - Insole: Ventilated IceFil Transfo 3D insole with 3 adjustable arches - Heel Retention: HRS-100 reinforced with 0.6mm membrane: Better heel positioning and reduced loss of power - Closure System: Boa L6 micro-adjustment

Made for winter hikes, snowshoe adventures, and long, cold days outdoors, the adidas Terrex winter boots are waterproof and fully insulated. COLD.RDY with PrimaLoft® wraps your foot in heat-sealing warmth, while RAIN.RDY seals out slush, snow, and rain to keep feet dry all day long. A BOA® Fit System lets you dial in a precise fit for confident footing. A BOOST midsole cushions and brings energy to every step, on and off the snow and in all temperatures. The Stealth winter grip rubber provides high-friction traction for confident footing on slick, icy ground. - BOA® Fit System for micro-adjustment, effortless on-and-off, and secure, consistent hold - Designed to insulate your body in cold weather — stay warm with adidas COLD.RDY - Waterproof textile upper with molded toe cap and external heel clip - PrimaLoft® Parley insulation keeps your feet warm all-day - adidas BOOST delivers incredible energy return and instant comfort with each step to keep you going

Good for the mud, good for stones, the Garneau Mudstone shoes have a flat outsole that's great for riding and walking around the trails, with a recessed insert that's compatible with all styles of SPD cleats. Great for Mountain Biking, Fat Biking, or any conditions when water and cold are present. The Mudstone Shoes have an extra insulated toe box with a high volume fit last, so you can wear thick socks without having to size up. They're fully waterproof with a three-layer construction using synthetic leather and a neoprene sealed cuff for better protection. BOA IP1 dial is easy to adjust while riding with gloves, and the Ergo Grip II outsole provides excellent traction in wet walking conditions. - Shoe Technology: "EEE" last specially designed for a higher volume, perfect for wearing thicker socks in cold temperatures - Closure with reversed hook and loop strap allows for fast transitions - Ergo Grip 2 outsole with removable studs provides excellent traction for walking and configured to maximize mud clearing - 3 layer construction with felt, 3mm PE, and foil to block the cold from the outsole - Boa IP1-S two-way micro-adjustment for easy replacement with hook and loop strap - Front opening with sealed zip prevents infiltrations - 435g (size 42) - SPD cleats fit all major MTB pedals - Cleats sold separately

The Carbon LS-100 III Shoes take all the features you love from the previous version, with the addition of Garneau's most innovative feature: the X-Comfort Zone. X-Comfort Zone technology allows the foot to swell up to 5mm while riding, thus eliminating hot spots and discomfort. It also allows for wider feet and eliminates bunions over time. The Boa IP1-S dial allows you to micro-adjust your fit with the twist of a knob, and our patented carbon composite outsole provides maximum power output. The shoes also come with a COOLMAX insole to provide cooling during hot summer months and Power Zone technology for maximum efficiency. The Carbon LS-100 III Shoes look amazing, are super durable and a great choice to complete your cycling outfit. Technical Details: - Shoe Technology : X-Comfort Zone - Power Zone: Increased arch support and power transfer - Shoes Weight: 8.3 oz / 235 g (size 42) - Outsole: Patented Carbon Composite outsole - Insole: COOLMAX: Moisture wicking, breathable and ventilated - Closure System: Boa IP1-S two-way micro-adjustment: Custom fit and easy replacement - Cleats: Cleats aren't included with the shoes.

Whether you're hunting for Strava PRs or looking to ride big elevation, the all-new Torch 3.0 is the perfect companion. Combining classic aesthetics, premium construction, and elevated comfort, the all-new Torch 3.0 is a not-so-distant relative to its S-Works counterpart. Sharing key features like a unidirectional carbon plate, dual-zone Boa closure, and a seamless upper, the Torch 3.0 is an efficient, comfortable, and dependable performance shoe. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Unidirectional Carbon sole engineered to be stiff, yet light with a large rubber heel and toe for off-the-bike traction. - Dual BOA Li2 dials for dual direction micro-adjustments and pop release - Seamless upper constructed from mesh, TPU, and with zonal reinforcement to maximize lockdown and comfort - Internal heel counter provides a supportive and secure heel fit - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 288g (1/2 pair, Size 42)

The all-new Union BOA® Shoes are set to take your mountain bike adventures to new, more adjustable, and sendier levels of "yew!" Get more power to the pedal and customize your fit to perfection with the dual BOA® Li2 system featured in these trail-ready shoes. Built with robust features including a molded cap design to protect against rock strikes, the Union mountain bike shoes handles the rigors of trail abuse with ease. With a lightweight and precise fit, the low-profile, custom-tuned midsole ratchets up your pedal grip and feel, giving you more comfort while you shred. Power to the pedal is optimized care of the molded internal stiffening plate, but it's not stiffness at the expense of off-bike comfort. Should you have to hike-a-bike around that downed tree, you're all good. The sole is designed using the Ultratac™ rubber compound, with the engineered tread pattern providing best-in-class grip and durability, while the 2-bolt cleat system is compatible with most major clipless pedal suppliers. Versatile and with understated style, Union BOA® Clipless MTB Shoes were born to rip, transitioning from sweet single track to your post-ride tailgate brews with ease. - Clipless mountain bike shoes with Boa® - Dual Boa® Li2 system secure, on-the-fly adjustability - Ultratac™ outsole balances grip and durability - Reinforced toe for protection against rock strikes

Ragnarök Tall is the remedy for cool and wet conditions. Our shoulder-season performance shoe features a waterproof membrane and tall neoprene cuff to regulate moisture and keep out mud and grit. End uncomfortable rides with Ragnarök’s unrivaled weather protection. - A redesigned opening makes Ragnarök easy to put on and take off, and a floating three-finger overflap allows riders to dial in the perfect fit - Ragnarök’s real rubber outsole has an aggressive tread for walking in mud and features a 2-bolt cleat mount - Tall neoprene cuff keeps debris out - Easy on and off - Floating three-finger overflap allows the BOA laces to tighten where they need to for an optimal fit - Imported

The Recon 3.0 is all about putting the legendary performance of our S-Works Recon - power transfer, comfort, light weight, style - in a package perfect for the XC and gravel rider. Starting with Body Geometry, Recon 3.0 delivers comfort and efficiency, with features that stand-out off the beaten path. Looking for in the saddle speed as well as off-bike performance? Recon 3.0 mates a carbon outsole with a Pave-inspired glass fiber forefoot to create Carbon STRIDE toe-flex, which lets your foot function naturally off the bike, yet still provides incredible power transfer with a stiffness index of 10.0. Whether you're flying up a run-up on the 'cross course or strolling into the brewhouse post ride, STRIDE toe-flex is a game changer. We know venturing off-road means venturing into the unknown, so we've given the Recon 3.0 XPEL Mesh to create a comfortable fit that sheds water, keeping the shoe light and making it dry as fast as it rides. Our SlipNot compound provides full rubber coverage of the outsole for off bike traction on any surface, with open treads to eject mud. Dual L6-Snap Boas and a Velcro forefoot closure ensure micro adjustable comfort with a secure fit designed for all day comfort and performance, whether your ride calls for open gravel, twisting single track, and more than your fair share of hike-a-bike. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Carbon STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness Index 10.0) - Fully-welded upper reduces seams for superior step-in comfort. - Independent BOA L6-Snap dials for on-the-fly micro-adjustment. - SlipNot rubber tread for confident traction on all terrain with removable toe studs. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 355g (1/2 pair, Size 42)

From the outset of the Torch 3.0 Road shoe design process, our goal was to create a performance offering as feature-packed as any top-end shoe. The challenge, however, was pulling this off at a palatable price. In order to achieve this, we utilized three strategically placed materials on the uppers that are welded together—TPU and mesh in the front and synthetic leather in the rear. This makes for a more comfortable and supportive front of the shoe. A stiff rear and heel cup, meanwhile, lock down your heel and keep all of your watts going into the pedals as efficiently as possible. This refined upper is combined with our legendary FACT carbon fiber sole to further ensure an efficient power transfer. Finally, we topped the Torch 3.0 off with two Boa S2-SV Snap dials for zonal closure, and a precise fit that leads to all-day comfort. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - FACT carbon composite sole and torsion box construction is directionally rigid for outstanding power transfer: Stiffness Index 8.5. - Dual Boa S2-SV Snap dial closure for on-the-fly micro-adjustment, backed by the Boa Lifetime Guarantee. - Mesh, TPU, and synthetic layer upper are placed in specific zones for comfort and lock-down, and are thermobonded for a superior fit. - Standard Fit for support and all-day comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 248g (1/2 pair, Size 42)

This is one of our best sellers across all Collections. It was designed by Louis Garneau himself after suffering a lot during the 1984 Los Angeles Olympics because he couldn’t find any technical shoes on the market at the time. And we’ve continued to improve it year after year since then. With a perfect racer fit, the carbon sole maximizes the energy transfer on the pedal and the sleek lines fit the foot perfectly while the perforated inner sole keeps you cool. We’ve thought of everything! Read the technical sheet, you’ll be impressed too. Technical Details: - Technology: RACER FIT: High-performance fit reduces stack height to pedal - Integrated X-Comfort Zone technology with better stretch - Outsole: Patented Carbon Composite outsole - Insole: COOLMAX®: Moisture-wicking, breathable, and ventilated - Closure System: Boa Li2: mechanism generates higher power with finer resolution - Cleats: SPD-SL compatible with 3 bolt

To give a break to the 26 bones that squash and squeeze in your foot while you’re riding, we have patented a unique X-Comfort Zone. It’s a small section inside the shoe that can expand up to 5 millimeters to prevent numbness. Without any extension system, the toes end up on top of each other and get numb. Thanks to this innovation, you won’t have to end your ride before you’re done ever again. For great performance, we’ve used a carbon composite sole that optimizes energy transfer on the pedal. We wish you an excellent season! - Technology : RACER FIT: High-performance fit reduces stack height to pedal - Integrated X-Comfort Zone technology with better stretch - Outsole: Patented Carbon Composite outsole - Insole: COOLMAX®: Moisture wicking, breathable and ventilated - Closure System: Boa Li2: mechanism generates higher power with finer resolution - Cleats: SPD-SL compatible with 3 bolt

Look good, feel good, ride good—and adage as old as cycling itself… That’s the idea behind the new Recon ADV, where riding in style is just as important as the actual ride. This gravel shoe checks all the boxes in the aesthetics department but is no slouch when it comes to cranking out miles. Recon ADV is suited for the rider who values adventure, time on the bike, and needs an all-day shoe that will keep going when the gravel ends. Recon ADV’s excellent walkability is made possible by STRIDE toe-flex technology, providing a more natural feeling for off-the-bike adventuring. Don’t let the good looks fool you, this shoe is also built inside-out with our Body Geometry technology, making it a menace on the pedals. Driven by nearly two decades of development and validated by data, we ensure there is no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as inline with your knee and hips. - STRIDE toe-flex technology allows greater toe flex for steep inclines inclines and improved walkability - Laser perforated upper features microfiber backing for better moisture management and supple feeling - Ride or hike in confidence with a TPU mudguard that offers protection from stone strikes - Pontoons create a stable pedal platform as well as aiding walking feel - Greater SlipNot rubber tread coverage on sole that’s optimized for gravel traction - Features proven Body Geometry technology like the Varus Wedge to maintain efficient and comfortable hip, knee, and foot alignment while riding

Transfer maximum power to the pedals. The Kestral Pro Boa combines our stiffest sole and clipless compatibility for an efficient all-mountain ride. The Boa Fit system means you can dial in a secure fit, while the wide Stealth C4 rubber sole provides confident footing in all terrain. Mesh inserts enhance breathability, and the quick-drying synthetic upper maintains all-weather comfort. - Boa Closure System for micro-adjustment, and secure and consistent hold - Mesh inserts enhance breathability, and the quick-drying synthetic upper maintains all-weather comfort - Stealth C4 rubber sole provides confident footing in all terrain - Durable, lightweight EVA midsole - Enjoy the comfort and performance of OrthoLite sockliner - Regular fit, clipless style

Designed to withstand the elements and provide comfort on rugged trails, the Trailcross GTX Flat Shoe blends a durable, hiking-inspired build with a high friction Stealth Phantom rubber outsole. - Bike and Hike outsole: designed for grip at the toe and heel while maintaining a pedal platform under foot - Weather-friendly GTX (Gore-Tex) mesh upper for breathability and comfort - Textile-free and closed cell sockliner - Lace tuck on the middle of the tongue - Neoprene cuff keeps debris out - Non-marking Phantom Dotty outsole for grip on and off the bike - Midsole flex points allow flex while hiking but keep stiffness while on the pedal

Ragnarök BOA® boots are perfect for the hard-to-predict weather of late fall and early spring. Built to block cold and moisture, these lightweight cycling boots feature a 25ºF+ (-4ºC+) comfort range to keep feet warm and dry through the chill of late autumn and early spring rides. - Free cleat plates for flat-pedal use are available upon request. Please contact brand support at info@45nrth.com - Rated for 25ºF+ (-4ºC+) comfort - Waterproof breathable membrane to manage moisture - Neoprene ankle cuff to keep out moisture and road grit - The BOA® Fit System delivers micro-adjustable, precision fit engineered to perform in the toughest conditions - Real-rubber outsole with added grip for slippery surfaces - 2-bolt cleat mount ANTI-SLIP MICROGLASS RUBBER A rubber compound electrostatically aligned with microscopic glass fibers to create abrasive protruding shards, increasing friction on slippery surfaces such as ice, wet wood, wet linoleum, and wet metal found on many stairs and floors. WATERPROOF-BREATHABLE MEMBRANE An ultra-thin sheet of microporous material behind our textile shells keeps you dry and warm in the harshest weather conditions. Our waterproof, breathable membranes stop liquid from the outside, but release vapor from the inside for thermal and moisture regulation. BOA CLOSURE Micro-adjustable BOA closure for perfectly dialed fit. LOW CUT NEOPRENE ANKLE Secure closure provides warmth and protection from the elements.

At a mere 150 grams, the S-Works EXOS are the lightest cycling shoes to ever come with a Boa® dial. And not only are they ridiculously light, but they still have all the features that are synonymous with the S-Works label. They’re still at that World Tour level, just ridiculously light. To get the weight down to the 150-gram mark without sacrificing power transfer, we implemented all the engineering bells and whistles we could think of. And when that wasn’t enough, we thought up some more. The carbon outsole was developed using an advanced form of Finite Element Analysis and pressure mapping to pull out material where it wasn’t needed. This allowed us to keep crazy-high stiffness numbers, too. For the uppers, we completely removed the heel counter. And with a little help from the space-grade Dyneema® mesh and some CubicTec reinforcement, the heel molds to the back of your foot, so nary a watt is wasted. Lastly, we developed a new Warp Sleeve vamp that let us get rid of the toe box, and this further cut down the weight and increased the comfort. Of course we couldn't do any of the above without including our coveted Body Geometry features, like the Longitudinal Arch, Varus Wedge, and Metatarsal Button. Each one of these features have been ergonomically designed and scientifically tested to not only boost power, but to also increase efficiency and to reduce the risk of injury. The S-Works EXOS are the lightest cycling shoes to ever have a Boa® dial—experience the feeling of lightness. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Our lightest FACT Powerline™ carbon plate maximizes power transfer: Stiffness Index 13.0 - A revolutionary Dyneema® Mesh allows us to achieve weight without sacrificing hold for the ultimate connection and comfort. - BOA IP1 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a Warp Sleeve vamp for the ultimate in connectivity, comfort, and speed. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 140g (1/2 pair, Size 42)

The Trailcross range was built from the ground up, starting with the Five Ten dotted outsole with the addition of a recessed cleat to clip into compatible pedals. This was then refined with hiking in mind, bringing the additional ridged grip to the toe and heel. The Trailcross Clip-In is a lightweight and breathable shoe. With the need for the shoe to provide all-day comfort but also deliver across the contact points on and off the bike, the mid-sole EVA technology provides the necessary toe flex for hiking, without losing the all-important stiffness. The Trailcross Clip-In utilizes a hook and loop closure for added security and to reduce heel lift. Clip-in pedal users no longer need to compromise when planning their next adventure.

The 2FO Cliplite puts precision fit at your toe tips, providing unparalleled pedal input for on-trail control. The micro-adjustable BOA® Li2 dials combined with a welded upper provide a ridiculously comfortable fit. Built on a cushioned EVA foam midsole and relaxed fit last, the 2FO Cliplite keeps you locked in and cooled down for all-day riding without sacrificing off-the-bike comfort and style. The shoe rides on our SlipNot™ FG rubber sole delivering best-in-class pedal grip and connection when hitting full send. The 2FO Cliplite is perfectly adjusted for all-out trail speed. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Welded upper protects and holds the foot to protect and ventilate while tackling gnarly terrain. - Independent BOA® Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa® guarantee. - Lollipop™ nylon shank is paired with an EVA midsole to flex where needed while remaining stiff for pedaling. - Micro-perforated synthetic provides a soft and supple feel without sacrificing protection and durability. - XPEL™ hydrophobic lining provides cushioning and doesn't retain water. - Two-bolt cleat pattern fits all major mountain pedals. - Landing Strip™ cleat pocket guides the cleat into the pedal for insanely fast engagement. - Approximate weight: 424g (1/2 pair, Size 44)

The pinnacle model within the Freerider family, the Freerider Pro VCS Mid includes upgraded features, including D30 ankle protection and a PRIMEKNIT ankle cuff to keep debris out. This shoe is for the all-mountain rider looking for added protection, quick-drying materials and unbeatable grip to keep them going over any trail. - Synthetic upper with impact resistant toe box for protection from trail hazards - Compression-molded EVA midsole balances pedal feel and power output - Hook-and-loop closure straps - D30 inner ankle protection - Primeknit ankle cuff keeps out unwanted debris from the trail - Stealth S1 dotty rubber outsole for unbeatable grip

Mountain bike shoes for aggressive, gravity-fueled riding. Downhill or enduro, these adidas Five Ten Hellcat Pro Mountain Bike Shoes offer all-conditions control for gravity-fueled riding. Cleat-compatible with a stiff midsole, they allow for aggressive pedaling. A synthetic upper with abrasion-resistant weldings provides extra durability. Non-marking Stealth Marathon rubber grips pedals and ground alike. This product is made with recycled content as part of our ambition to end plastic waste. 20% of pieces used to make the upper are made with minimum 50% recycled content. SPECIFICATIONS - Regular fit - Lace and hook-and-loop closure - Textile upper - Molded sockliner - Abrasion-resistant weldings - Clipless-compatible - Stealth Marathon rubber outsole - Imported

Mountain bike shoes for aggressive, gravity-fueled riding. Downhill or enduro, these adidas Five Ten Hellcat Pro Mountain Bike Shoes offer all-conditions control for gravity-fueled riding. Cleat-compatible with a stiff midsole, they allow for aggressive pedaling. A synthetic upper with abrasion-resistant weldings provides extra durability. Non-marking Stealth Marathon rubber grips pedals and ground alike. This product is made with recycled content as part of our ambition to end plastic waste. 20% of pieces used to make the upper are made with minimum 50% recycled content. SPECIFICATIONS - Regular fit - Lace and hook-and-loop closure - Textile upper - Molded sockliner - Abrasion-resistant weldings - Clipless-compatible - Stealth Marathon rubber outsole - Imported

High-Top Shoes for Adventure Biking To bikepack is to explore. When the ride is more about the adventure than the destination, these adidas Five Ten mountain biking shoes fit the bill. Pedal, push, and hike in any terrain with the comfort, traction, and support made for all-day adventure. - Regular fit - Lace closure - Textile and mesh upper - High-top adventure biking shoes - EVA midsole - Non-marking Stealth Phantom rubber outsole - Imported

The Rincon combines a supple, breathable Synchwire upper with a robust nylon-composite plate and an aggressive, dual-injected rubber outsole for excellent traction that won't de-laminate or break down. A supportive 3D-molded footbed enhances comfort and fit, which is adjustable via a single BOA L6 dial featuring 1mm adjustment and an adjustable forefoot strap. It's a great choice for riders looking for reliable performance with outstanding value in off-road footwear. Upper construction: - One-piece Synchwire upper with thermo-bonded exo-structure - Rubber reinforced heel and toe sections - Boa L6 dial featuring 1mm adjustment and macro release, with steel lace and soft lace guides - Reflective heel tab Footbed: - Die-cut EVA footbed with medium arch support Outsole: - Nylon-composite 2-bolt plate with dual-injected rubber outsole - Stainless steel hardware Product weight - 320 grams (size 39)

Giro's Terradura blends walkability, durability and pedaling stiffness for a more versatile version of a race-inspired shoe. A robust Vibram lug outsole grips pedals and various surfaces—mud, logs, rocks—with equal dexterity. The supple microfiber upper is tailored for a woman’s foot and features a micro-ratcheting buckle and two-strap closure system that adjusts quickly and easily to tune the fit. A reinforced toe box gives impact protection where and when it’s needed most.

The Recon 2.0 was made for riders who seek out dirt roads and challenging trails in search of a shoe that delivers comfort and efficiency in a durable package, with the scientifically proven performance benefits of Body Geometry. Whether you’re saddling up a Diverge or Creo to ride with your gravel group or hopping on your epic to embark on an all-day trail session, the Recon 2.0 is your partner in crime for days spent in the dirt. Body Geometry: Like every Body Geometry shoe, the Recon 2.0 is ergonomically designed and scientifically proven to improve comfort, increase performance, and reduce the chance of injury for every rider with patented technology, while improving power by 7 watts - validated by science. Stride Technology: Stride technology provides a flexible outsole and upper around the toe box combined with a stiff cleat pocket, enabling the shoe to easily flex when walking and remain stiff and efficient when pedaling. Efficiency: The Recon 2.0 features a Li2 Boa Dial for adjustability on the fly, making getting in and out of the shoe a breeze. BOA soft-lace cables made from a Dyneema yarn allow us to do away with hard molded guides for a more comfortable fit. The forefoot strap above the toes helps riders adjust volume around their toes to tailor the fit to their unique foot, connecting you to the bike for confidence when hitting a new feature or tackling loose and technical gravel. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Injection STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness index 6.0 - Welded upper reduces seams for superior step-in comfort. - BOA® Li2 dials for on-the-fly micro-adjustment. - SlipNot™ rubber tread for confident traction on all terrain. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 307g (1/2 pair, Size 42)

If you're ready to step up to a higher-performing option that looks good and feels great, the Torch 2.0 is the perfect upgrade for you. The Torch 2.0 is the ideal intersection of high performance and comfort, offering you a pair of shoes you can count on, whether you're joining their first group ride or clipping into the spin bike to get their sweat on. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Woven Carbon sole engineered to be stiff, yet light with a large rubber heel and toe for off-the-bike traction. - BOA Li2 dial for dual direction micro-adjustments and pop release, forefoot strap for fine-tuning fit - Seamless Synthetic upper for a supple fit. All over laser perforation added breathability - Internal heel counter provides a supportive and secure heel fit - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 268g (1/2 pair, Size 42)

The all-new Union Clipless Shoes are set to take your mountain bike adventures to new and sendier levels of "yew!" Built with robust features including a molded cap design to protect against rock strikes, the Union mountain bike shoes handles the rigors of trail abuse with ease. With a lightweight and precise fit, the low-profile, custom-tuned midsole ratchets up your pedal grip and feel, giving you more comfort while you shred. Power to the pedal is optimized care of the molded internal stiffening plate, but it's not stiffness at the expense of off-bike comfort. Should you have to hike-a-bike around that downed tree, you're all good. The sole is designed using the Ultratac™ rubber compound, with the engineered tread pattern providing best-in-class grip and durability, while the 2-bolt cleat system is compatible with most major clipless pedal suppliers. Versatile and with understated style, Union Clipless MTB Shoes were born to rip, transitioning from sweet single track to your post-ride tailgate brews with ease. - Clipless mountain bike shoes - Low-profile Velcro strap and lace system - Ultratac™ outsole balances grip and durability - Low-profile Velcro strap and lace system - Reinforced toe for protection against rock strikes

The 2FO DH Clip is all about going fast and taking chances. Nearly vertical trail? No problem. Mega rock garden? Bring it on. Huge gap jump? Send it. Developed with the help of our world-class DH athletes and three-time reigning DH world champion Loic Bruni, we've built this shoe with the right amount of protection, hold, and style to give you the confidence to get sendy. Last but not least, a new SlipNot FG rubber sole delivers best-in-class pedal grip and connection when things get rowdy. It's the perfect shoe for going fast when the going gets gnarly. - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks. - Cushioned EVA foam midsole for comfort. - Extended length cleat slot (4mm) for rearward cleat set up option. - Reinforced upper protects and holds the foot to take on the gnarliest terrain with confidence. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - SlipNot FG rubber sole for confident traction. - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - Synthetic leather upper with added protection keeps you comfortable and is built to last. - Two-bolt cleat pattern fits all major mountain pedals. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time.

Just because winning an XC World Cup isn't on your to-do list, doesn't mean you don't value performance and comfort. Recon 2.0 is your shoe. Inspired by S-Works Recon, with Body Geometry comfort and efficiency, Recon 2.0 puts all that performance within easy reach. Using our exclusive STRIDE toe-flex technology, the nylon outsole uses a TPU-injected forefoot for natural movement off-bike, while still providing a stiffness index of 6.0 for in-the-saddle performance. We've also lifted the heel for an even more natural feeling while walking. To create traction off the bike in wet or dry, gravel or dirt, we've covered the nylon outsole with our SlipNot compound. If the traction's needed in the wet, you can also rest easy knowing the XPEL mesh used through the Recon 2.0 won't get bogged down with water and will dry exceptionally quickly. No more wet shoes the morning after a wet ride. An L6-Snap Boa and a Velcro forefoot closure ensure micro-adjustable comfort with a secure fit designed for all-day comfort and performance, whether your ride calls for open gravel, twisting single track, and more than your fair share of hike-a-bike. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Injection STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness index 6.0 - Welded upper reduces seams for superior step-in comfort. - BOA L6-Snap dials for on-the-fly micro-adjustment. - SlipNot rubber tread for confident traction on all terrain. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 357g (1/2 pair, Size 42)

Built for high-alpine terrain, the Rime 2.0 brings rugged capability to ensure you can conquer any mountain trail. XPEL mesh lining sheds while you shred, preventing the shoe from becoming water-logged in creek crossings and will dry overnight. Our Lollipop midsole construction is paired with a gnarly Vibram rubber outsole creating superb/unmatched off-bike push-ability for getting over any unrideable terrain. For closure, a standard lace is paired with an L6 Boa for a precise fit, on-bike adjustability, and redundancy to keep you riding when you're in the backcountry. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time. - Landing Strip cleat pocket is optimized for effortless foot-out riding style with platform clip pedals. - Boa L6-Snap dials for easy adjustment, backed by the Boa Lifetime Guarantee - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - Vibram rubber sole for confident traction - Relaxed Fit for a balance of pedal feel and off-bike comfort - Two-bolt cleat pattern fits all major mountain pedals. - Approximate weight: 384g (1/2 pair, size 42)

The Torch 2.0 Road shoes are all about comfort—well, comfort and performance that is. Due to the materials, road shoes often feel stiff and uncomfortable. We decided to address this annoyance head on, though. To do so, we've implemented a 100% mesh and TPU construction on the Torch 2.0 that allows for more wiggle room in the toe box and a less constrictive, sock-like feel. The upper is then paired with our medium-stiffness FACT carbon sole and a rubber heel and toe that provide the perfect degree of off-the-bike traction. For the closure, we added a single lightweight Boa® IP1 dial that features tool-free snap replacement capability, while also providing simple, on-the-fly micro-adjustments. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Carbon sole with a 7.0 Stiffness Index is engineered to be moderately stiff, yet light with a rubber heel and toe for off-the-bike traction. - Lightweight Boa® IP1 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - Mesh and TPU upper for a supple fit. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 235g (1/2 pair, Size 42)

Bont Riot+ , the world's first carbon-composite, heat-moldable, entry-level cycling shoe now available with BOA retention system. The Riot+ combines Bont's pro series technical features, our power transfer platform, anatomical shaping with competition grade materials and BOA retention system to create the most technically advanced entry level road cycling shoe. - Model: Riot+ - Material: Carbon Composite Construction with Microfiber Upper - Stack Height: 4.8 mm - Air Vents: Ventilations holes through upper and mesh inserts - Innersole: Comfort - Sole Guards: Replaceable - Cleat Mounting: 3 Hole Look Configuration - Closing Options: Boa dial and Z from Velcro strap - Weight: 280 grams

The Trailcross Clip-In is the latest addition to the Five Ten Trailcross family, designed from the ground up with adventure at its core. Packed with all the Trailcross technology, this latest model provides clip-in performance on the bike and all-day comfort when hiking off the bike. The addition of the Clip-In model takes the range to the next level, making our award-winning design available to clip-in pedal users for the first time. The Trailcross range was built from the ground up, starting with the Five Ten dotted outsole with the addition of a recessed cleat to clip into compatible pedals. This was then refined with hiking in mind, bringing the additional ridged grip to the toe and heel. The Trailcross Clip-In is a lightweight and breathable shoe. With the need for the shoe to provide all-day comfort but also deliver across the contact points on and off the bike, the mid-sole EVA technology provides the necessary toe flex for hiking, without losing the all-important stiffness. The Trailcross Clip-In utilizes a hook and loop closure for added security and to reduce heel lift. Clip-in pedal users no longer need to compromise when planning their next adventure. - Lace & velcro closure - Breathable mesh - RPU overlays - Impact resistant toe box - Lightweight eva w/ hike a bike last - Stealth marathon

The Trailcross Clip-In is the latest addition to the Five Ten Trailcross family, designed from the ground up with adventure at its core. Packed with all the Trailcross technology, this latest model provides clip-in performance on the bike and all-day comfort when hiking off the bike. The addition of the Clip-In model takes the range to the next level, making our award-winning design available to clip-in pedal users for the first time. The Trailcross range was built from the ground up, starting with the Five Ten dotted outsole with the addition of a recessed cleat to clip into compatible pedals. This was then refined with hiking in mind, bringing the additional ridged grip to the toe and heel. The Trailcross Clip-In is a lightweight and breathable shoe. With the need for the shoe to provide all-day comfort but also deliver across the contact points on and off the bike, the mid-sole EVA technology provides the necessary toe flex for hiking, without losing the all-important stiffness. The Trailcross Clip-In utilizes a hook and loop closure for added security and to reduce heel lift. Clip-in pedal users no longer need to compromise when planning their next adventure. - Lace & velcro closure - Breathable mesh - RPU overlays - Impact resistant toe box - Lightweight eva w/ hike a bike last - Stealth marathon

Lightweight mountain biking shoes. Ride, eat, sleep, repeat. Hike into the backcountry and feel the freedom of singletrack trails and abandoned dirt roads. Made for adventure riding over rugged terrain, these adidas Five Ten mountain bike shoes have the lightweight, cushioned feel of a trail runner and the pedal-gripping power to ride to any summit. HIGH-FRICTION GRIP Non-marking Stealth Phantom Dotty outsole offers high-friction grip on and off the bike. SHEDS WATER Midsole drainage allows water to escape from shoe for quicker drying. SEALS OUT DIRT A neoprene cuff keeps out dirt and debris. DURABILITY Rugged construction holds up to mountain biking and off-trail adventure. SPECIFICATIONS - Regular fit - Lace closure - Textile upper with neoprene cuffs - Drain ports for water exit - Stealth Phantom rubber outsole - Imported

On gravel, style is a state of mind. The new S-Works Recon Lace will put a smile on your face and style in your pace every time you head out the door. A timeless look combined with tried and true Body Geometry features and the performance and durability that have become hallmarks of S-Works Recon shoes. Plus, you’ll leave everyone in the group asking, "What shoes are those?" - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency; optimize hip, knee, and foot alignment; and reduce injury risks. - Our stiffest and lightest XC FACT carbon plate maximizes power transfer: Stiffness Index 13.0. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Titanium alloy cleat nut. - SlipNot rubber heel and toe tread for confident traction on all terrain with removable toe studs. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Two-bolt cleat pattern fits all major MTB pedals.

Flat Pedal Mountain Bike Shoes with an Impact-Resistant Toe Box The adidas Five Ten Freerider Pro Mountain Bike Shoes match proven flat pedal control with enhanced impact coverage and a quick-drying synthetic upper. Cushioned and water-resistant, they offer comfort for full days on the bike. Stealth S1 rubber and a Dotty tread offer the legendary pedal control you expect from the Freerider. - Lace closure - Fast-drying synthetic upper - OrthoLite sockliner - Molded EVA midsole - Impact-resistant urethane toe box - Stealth S1 Dotty rubber outsole - Imported

The adidas Five Ten Freerider Pro Mountain Bike Shoes match proven flat pedal control with enhanced impact coverage. Recycled materials raise the bar for sustainability. Stealth rubber and a Dotty tread offer the legendary pedal control you expect from the Freerider family. Their comfortable build lets you move easily from bike to street for everyday versatility. - Lace closure - Quick-dry synthetic upper - Impact-resistant PORON toe box - OrthoLite sockliner - EVA midsole - Stealth S1 Dotty rubber outsole - Yarn in upper contains at least 50% Parley Ocean Plastic and 50% recycled polyester

Flat pedal mountain bike shoes with an impact resistant toe box. The adidas Five Ten Freerider Pro Mountain Bike Shoes match proven flat pedal control with enhanced impact coverage and a quick-drying synthetic upper. Cushioned and water-resistant, they offer comfort for full days on the bike. Stealth S1 rubber and a Dotty tread offer the legendary pedal control you expect from the Freerider. RECYCLED CONTENT This product is made with recycled content as part of our ambition to end plastic waste. PEDAL-GRIPPING RUBBER Stealth S1 Dotty rubber outsole is size-specific for maximum grip on and off the pedal. IMPACT-RESISTANT TOE BOX Three-layer reinforced toe box adds impact resistance. QUICK-DRYING UPPER Synthetic upper offers quick-drying convenience. SPECIFICATIONS - Lace closure - Fast-drying synthetic upper - OrthoLite sockliner - Molded EVA midsole - Impact-resistant toe box - Stealth S1 Dotty rubber outsole - Imported

Clipless-compatible mountain biking shoes for gravity-fueled riding. Seek out epic new descents or muscle through rough terrain. These adidas Five Ten Hellcat Mountain Bike Shoes provide all-conditions comfort and precision geared towards enduro and downhill rides. They're wide and stiff enough to give a controlled-pedal feel plus durable and impact-resistant. Riding clipless or flat, they offer the grip to power down your line. This product is made with recycled content as part of our ambition to end plastic waste. 20% of pieces used to make the upper are made with minimum 50% recycled content. SPECIFICATIONS - Regular fit - Lace and hook-and-loop closures - Coated leather upper - Molded sockliner - Stealth Marathon rubber outsole - Clipless-compatible - Imported

Flat-pedal mountain bike shoes for gravity and enduro riding. Choose your line and let it roll. The adidas Five Ten Impact Pro shoes set the standard for flat-pedal mountain bike control. Pedal-gripping tread and a wide, stiff platform support aggressive enduro and gravity riding. Go ahead and send it. PEDAL-GRIPPING CONTROL Stealth S1 rubber provides unmatched pedal grip. WIDE, STIFF PLATFORM Reinforced midsole provides a stiff platform for aggressive riding. IMPACT RESISTANT PORON reinforced toe box adds impact resistance. SPECIFICATIONS - Lace closure - Quick-dry synthetic upper with reinforced toe box - Stiff, supportive feel - Gravity-minded mountain biking shoes - Compression-molded PU midsole - Stealth S1 rubber outsole - Imported

The 2FO DH Flat is all about going fast and taking chances. Nearly vertical trail? No problem. Mega rock garden? Bring it on. Huge gap jump? Send it. Developed with the help of our world-class DH athletes and three-time reigning DH world champion Loic Bruni, we've built this shoe with the right amount of protection, hold, and style to give you the confidence to get sendy. Last but not least, a new SlipNot ST rubber sole delivers best-in-class pedal grip and connection when things get rowdy. It's the perfect shoe for going fast when the going gets gnarly. - Approximate weight: 395.9 grams - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks. - Cushioned EVA foam midsole for comfort and impact absorption with shank layer for impact absorption and stability. - Leather and textile upper with added protection keeps you comfortable and is built to last. - Reinforced upper protects and holds the foot to take on the gnarliest terrain with confidence. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - SlipNot ST rubber sole for unsurpassed flat-pedal grip and connection. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time.

Built for high-alpine terrain, the Rime 2.0 brings rugged capability to ensure you can conquer any mountain trail. XPEL mesh lining sheds while you shred, preventing the shoe from becoming water-logged in creek crossings and will dry overnight. Our Lollipop midsole construction is paired with a gnarly Vibram rubber outsole creating superb/unmatched off-bike push-ability for getting over any unrideable terrain. For closure, a standard lace is paired with a L6 Boa® for precise fit, on-bike adjustability, and redundancy to keep you riding when you're in the backcountry. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - X-PEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time. - Upper is treated with DWR for water repellency and easy cleaning. - Landing Strip cleat pocket is optimized for effortless foot-out riding style with platform clip pedals. - Boa L6 dials for easy adjustment, backed by the Boa Lifetime Guarantee. - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - Vibram™ rubber sole for confident traction. - Cushioned EVA foam midsole for comfort with molded heel cup for stability. - Relaxed Fit last for a balance of pedal feel and off-bike comfort. - Two-bolt cleat pattern fits all major mountain pedals. - Approximate weight: 384g (1/2 pair, size 42)

The Torch 2.0 Road shoes are all about comfort — well, comfort and performance that is. Due to the materials, road shoes often feel stiff and uncomfortable. Specialized decided to address this annoyance head on, though. To do so, they've implemented a 100% mesh and TPU construction on the Torch 2.0 that allows for more wiggle room in the toe box and a less constrictive, sock-like feel. The upper is then paired with the medium-stiffness FACT carbon sole and a rubber heel and toe that provide the perfect degree of off-the-bike traction. For the closure, Specialized added a single lightweight Boa IP1 dial that features tool-free snap replacement capability, while also providing simple, on-the-fly micro-adjustments. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Carbon sole with a 7.0 Stiffness Index is engineered to be moderately stiff, yet light with a rubber heel and toe for off-the-bike traction. - Lightweight Boa IP1 dial closure for on-the-fly micro-adjustment, backed by the Boa Lifetime Guarantee. - Mesh and TPU upper for a supple fit. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 235g (1/2 pair, Size 42)

The Torch 2.0 Road shoes are all about comfort — well, comfort and performance that is. Due to the materials, road shoes often feel stiff and uncomfortable. Specialized decided to address this annoyance head-on, though. To do so, they've implemented a 100% mesh and TPU construction on the Torch 2.0 that allows for more wiggle room in the toe box and a less constrictive, sock-like feel. The upper is then paired with the medium-stiffness FACT carbon sole and a rubber heel and toe that provide the perfect degree of off-the-bike traction. For the closure, Specialized added a single lightweight Boa IP1 dial that features tool-free snap replacement capability, while also providing simple, on-the-fly micro-adjustments. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Carbon sole with a 7.0 Stiffness Index is engineered to be moderately stiff, yet light with a rubber heel and toe for off-the-bike traction. - Lightweight Boa IP1 dial closure for on-the-fly micro-adjustment, backed by the Boa Lifetime Guarantee. - Mesh and TPU upper for a supple fit. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 235g (1/2 pair, Size 42)

SUPREME PERFORMANCE CLIPLESS The MTB 4.0 PRO Clipless shoe is a SPD clip shoe featuring a deep 25mm indexed cleat channel. The 15mm rear extension reduces strain on the Achilles muscle and adds stability and comfort for rigorous gravity riding. The stabilizing neoprene ankle collar will give you that feeling of added confidence as well. It’s quick drying material and great ventilation make it an ideal all-weather shoe for enduro and downhill riders. While the standard 4.0 Clip shoe has laces, this 4.0 PRO model features a micro-adjuster MOZ cable fit system. This lets you make micro-adjustments on or off the bike. Get the perfect fit and then lock in for the ride! What’s special about the Leatt shoe? Our secret rubber recipe is like your grandma’s hot sauce. Better than anyone else’s! The unique production method offers incredible RideGrip™ for great bike control in all weather conditions. The sole also features mud channels which efficiently keep the mud off the soles so that you are in constant contact with your pedals or the ground. If you want to stay on top of the game, then you need the Leatt MTB shoes. NEW MOZ cable lacing fit system located on top of the shoe: - Enables micro-adjustments for the perfect fit and comfort - Easy to use on and off the bike, even with gloves on Leatt SPD Channel offers all-pedal compatibility: - Unique to Leatt SPD channels with extended travel for all type of riding - Cleat shims included for all-round pedal compatibility RideGrip™ Compound delivers amazing traction for ultimate bike control: - Maximum tear, puncture and abrasion resistance - Aggressive lug thread design for greater traction off the bike Durable synthetic leather shoe upper suitable for tough riding conditions: - Tension straps for foot security and weather protection - Ventilation in the toe box and sides Control Flex Shank: - Semi-Rigid Flex control for great bike feel Midsole: - Anti-compression midsole for comfort. Insole: - Active Carbon moisture wicking, quick dry, anti-bacteria, anti-odor material for comfort and hygiene Protection: - Stabilizing neoprene ankle collar - Molded stabilizing heel and rigid reinforced toe area Lining: - Active Carbon moisture wicking, quick dry, anti-bacteria, anti-odor material for comfort and hygiene