Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Other

$15.00
Surly wants you to be able to set up you ride just the way you want it. This pair of adapter washers make it so you can throw your favorite 135, 170, or 190mm O.L.D. 10mm solid axle hub into the rear end of a 142, 177, or 197mm spaced thru-axle frame. Add the adapters, add the wheel, install and tighten the nuts and, bam, you're ready to rip. Make sure the solid axle on your wheel is the right length for the frame spacing. For instance: 190mm OLD QR goes with 197mm thru-axle spacing.
$70.00
The tool-free Maxle Ultimate Front brings exceptional stiffness and durability to your ride in a high clamping force, easiest-to-use internal cam thru-axle system.
$1.20 - $1.98
- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
$4.99
The Problem Solvers Cassette Spacers are made of light and durable anodized aluminum and come in different thicknesses for correctly spacing various brand and model cassette cogs. Measure and match your spacers to choose the right width.
$7.99 - $13.85
The Problem Solvers Handlebar Clamp Shim allows you to fit almost any handlebars in almost any stem. It's machined of light and durable aluminum and grooved on the inside to hold tightly.
$19.99
Shimano's In-Line Brake Cable Adjuster with quick release allows you to make changes to your road caliper brake's cable tension or open a brake caliper's arms to remove a wheel.
$20.00
- Compatible with Shimano, SRAM, Campagnolo and KMC 11 speed chains - DLC Coated - Non-reusable - Opening Tool Required - Card of 2 pairs
$29.99
The Problem Solvers Handlebar Accessory Mount comes in handy when you don't have enough room on your handlebars for mounting all your accessories. It fits onto all handlebars, holds tightly and gives you 80mm of width for mounting more of your essential devices where they're easy to see and use (photo).
$7.50 $10.00 25% Off
Keep the weight down and your headset snug with the Specialzied Carbon Steerer Tube Plug.
$49.99
These simple clamps allow riders to mount I-Spec II compatible shifters or dropper levers onto their bars without the otherwise-requisite Shimano I-Spec II compatible brake levers. Sold individually and can be used for either right- or left-hand side. - Hinged clamps for easy installation without removing other components - AL-6061, anodized black - 23 grams - For use only with I-Spec II compatible shifters or dropper lever
$59.00
The tool-free Maxle Lite brings exceptional stiffness and durability to your fork in a light, easiest-to-use expanding wedge thru-axle system. - Thread Length: 9mm - Thread Pitch: 15 x 1.5mm
$19.00
- Powermeter Crank Arm Bolt Kit and AXS Cover Plug Drive Side M18/M30 Dub Steel Black Rival D1
$59.99
The Problem Solvers Cable Doublers are made of light, durable machined and anodized aluminum and they are Teflon coated for a super-smooth cable pull every time. They come in two models. The first allows you to control two brakes with one lever. The second allows you to control one brake with two levers. Why? Well, there are myriad applications: tandems, cyclocross bikes, fixies, tricycles, recumbents, cycles for those with special needs, bike polo bicycles, those 4-person bikes you see on beach boulevards, and so on. You could even link both models of Cable Doublers together for the ultimate in redundancy!
$40.00 - $69.99
ReMatch adapters are designed to integrate different generations of Shimano Brakes to Shimano Shifters. Rematch Adapter 1.1 connects Shimano I-Spec A/B shifter to I-Spec II brake. - Made from CNC Machined T6061 Aluminum - Anodized Black - No additional hardware needed ReMatch 1.1 is NOT compatible with Deore M610 or SLX M670 shifters
$20.00
Whether for derailleur clamp clearance, tire clearance, or personal preference, sometimes it can be advantageous to run the wheel further back in the dropouts. Monkey Nuts install into Surly horizontal dropouts to make spacing the wheel back easy. There are 3 different sets depending on the type of dropout and axle configuration the dropout is intended for. Simply select the correct version of Monkey Nut, install it into the frame, and slam the wheel all the way forward. Bang, done.
$19.99
The Problem Solvers Quick-Release Nut Light Mount is an ingenious solution when your handlebars are too crowded to accept a light. This fine CNC-machined aluminum post simply screws on in place of your left, front quick-release nut to provide a great place to mount your light. Lower light mounting improves your depth perception and shows more details of the road condition ahead, too.
$9.40
Thin, durable clear chainstay protector with extra-strong adhesive. - Overall length - 10.375
$65.00
- Pike and Pike DJ Solo Air 1 year service kit - Includes dust seals, foam rings, o-ring seals, Charger sealhead, SA sealhead
$19.99
Odyssey's original dual cable detangler system has been the industry standard since day one. Odyssey has been making the Gyro since 1986 and constantly improving it along the way. Everything you need to run a Gyro. Odyssey Gyro cables and upper and lower cable stops included.
$15.00
Don’t get stuck between dropper sizes. The unique OneUp travel adjust shims allow you to custom tune your post by lowering the travel and extended length of your post by as much as 50mm in any increment you like. Want an oh so fashionable 128.99mm drop? You got it! Drop tuning can be done on-bike, tool free and without removing the saddle or touching a shock pump. Lowering the post travel also increases bushing overlap, which is great for heavier riders. - Compatible with V1 Droppers only - 170mm Dropper Post - adjustable down to 120mm - 150mm Dropper Post - adjustable down to 100mm
$70.00 - $75.00
The tool-free Maxle Ultimate Rear brings exceptional stiffness and durability to your ride in a high clamping force, easiest-to-use internal cam thru axle system.
$38.00
Useful on some bikes with 135mm rear dropout spacing that have cranks with longer spindles.
$20.00
- Two machined aluminum spacers (some kits may include a sleeve) for mounting one end of Manitou rear shocks (air or coil) - Sold as a set of two spacers: two sets required per shock, one per each eyelet - Sized by bolt diameter: M6, M8, or M10) and frame mount ID width (in mm) - This hardware is for 2011+ shocks with 15mm eyelets
$519.00 - $619.00
The OSPW X for SRAM Eagle AXS features a narrow wide tooth profile to ensure durable chain retention. The 14-tooth upper and 18-tooth lower pulleys reduce chain drag, while the custom-designed carbon fiber pulley cage ensures both durability and light weight. - Pulley Wheels: CeramicSpeed 14-tooth upper and 18-tooth lower - Pulley Wheel Material: aluminum - Cage Material: Carbon-reinforced PA - Bearing Options: CeramicSpeed Standard or Coated - CeramicSpeed Grease/Oil: Pulley Oil - Compatibility: SRAM Eagle AXS (Electronic) - Compatibility Cassette: 10-52 tooth max - Spring Tension Settings: 3 - Speed: 12-speed - Discipline: Off-road and Gravity In the box: - A complete OSPW X System for SRAM Eagle AXS - CeramicSpeed Bearing Oil in a 15ml dropper bottle
$8.95
Replacement derailleur hanger screws for Syntace X-12 system.
$69.95
The Wolf Tooth ReMote Pro is the most adjustable and refined dropper lever. It can be moved laterally along the handlebar and rotated around the handlebar as can be done with all dropper levers, while also allowing for 48 deg of rotation to set the lever starting point, independent of cable tension – no other dropper lever allows for this to be adjusted. ReMote Pro also has a cable pulley with a cam (oval) shape that provides more leverage at the beginning of the lever throw; this is when dropper posts need more force to open the fluid reservoir valve that allows the post to move. And just like other Wolf Tooth dropper levers, ReMote Pro features a large sealed custom bearing and is machined at Wolf Tooth in Minnesota, USA. - Machined surface of paddle provides extra grip - 6061 T6 aluminum construction with Delrin axle - Large sealed cartridge bearing is shielded from the elements - Stainless steel bolts for unprecedented adjustability - Cable clamp won’t pinch or bend cable - Integrated barrel adjuster is the only plastic component - Compatible with all cable-actuated dropper posts - Various clamp options to integrate with brakes from popular manufacturers
$29.95
Wolf Tooth ShiftMounts are adapter mounts that allow you to integrate SRAM and Shimano shifters with several different brakes from Shimano, SRAM, and more. Handlebar space is prime real estate and the ShiftMount seamlessly integrates brakes and shifters for a clean look. - Designed to work with rear (right side) brakes and shifters - Consult the brake and shifter manufacturers to understand which mounting interface you have on your brakes and shifters - For handlebar clamp ShiftMounts tighten clamp bolt to 1-2 Nm max torque - 6061-T6 aluminum - ISEV-MM is for a Shimano I-SPEC EV shifter mounting to a SRAM MatchMaker brake
$12.00
Profile Design's UCM XL Universal Computer Mount provides a convenient 60mm-long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.
$45.00
Upgrade your ride. The highly tunable DebonAir air spring is ready for whatever the trail demands. Buttery smooth feel off the top, now optimized to maintain higher ride height and add more confidence on technical terrain. - RockShox Air Spring Upgrade Kit - DebonAir C1, 170 mm, ZEB, Silver Head, A1+
$34.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA
Page 1 of 56 Next page