Filter By:
- Rigid (38)
- Suspension (67)
- Show More Brands
- Show Fewer Brands
Forks
$4.99
$10.00
50% Off
Keep the weight down and your headset snug with the Specialzied Carbon Steerer Tube Plug.
$15.90
- Clamps on to dual-Crown fork stanchions to prevent damage to frame
- Easy to install and adjust, More secure and lower profile than stock bumpers
- Molded loops allow clean and easy zip-Tie number plate mounting
- Available for 35mm boxxer or 40mm fox stanchions, Sold in pairs
$18.00 - $43.00
Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.
$27.00
Service your suspension fork with Enduro Seal KIts.
- Custom made for each make and model of fork
$109.99
- Designed to match the Pake Rum Runner Track frames
- Straight legs with unicrown CrMo construction
- 300mm CrMo steerer with 38mm rake
$119.99
- Add a disc brake to any track bike with IS disc mounts for 160mm rotor
- Straight legs with unicrown CrMo construction
- 300mm CrMo steerer
- Forward facing dropouts for easy wheel removal
- Black fork is designed to match the Pake Rum Runner Track frames
$144.99 - $169.99
Made from revised 100% Cult Classic tubing for increased strength and then 100% post-weld heat treated. 1-pc machined steerer tube with an integrated bearing race, tapered legs, and plenty of tire clearance.
$144.99
Made from revised 100% Cult Classic tubing for increased strength and then 100% post-weld heat treated. Investment cast 1pc drop outs for maximum strength and a super sleek finish. Features an updated top cap retention design.
- 1-pc machined steerer tube with an integrated bearing race
- Tapered legs
- Tire clearance for 2.40” tires
- Updated top cap retention design
$144.99
Odyssey's 41-Thermal forks quickly established a reputation for strength and quality when originally introduced in 1999, and they have since gone on to change the standards that all forks are judged by.
Features:
- Fully redesigned
- Laboratory tested and team proven
- New, custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance
- All-new steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race
- New, optimized, 4mm dropout shape for grind and peg clearance
- Updated 7075-T6 pre-load bolt, US Pat. No. 7,591,474
- Proven 41-Thermal processed 4130 chromoly
- Legendary lifetime replacement warranty
Specs:
- 25mm steep offset
- 3/8-inch axle slots only
- 990 brake mounts
- Starting at 2lb 2oz (912 grams)
$159.99
Odyssey's 41-Thermal forks quickly established a reputation for strength and quality when they originally introduced them in 1999, and they have since gone on to change the standards that all forks are judged by. Their new R-Series forks continue this tradition.
FEATURES
- Fully redesigned.
- Laboratory tested and team proven.
- New, custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance.
- All-new steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race.
- New, optimized, 4mm dropout shape for grind and peg clearance.
- Updated 7075-T6 pre-load bolt
- Proven 41-Thermal processed 4130 chromoly
- Legendary lifetime replacement warranty
SPECS
- 32mm traditional offset
- 3/8” axle slots only Starting at 1lb 15.2oz (885 grams)
$169.99 - $189.99
Laterally stiff and fine riding steel-lugged cross fork. Features a sloping lugged crown with cutouts on outside tangs, long inside tangs, and an International Standard disc tab.
- Tange Infinity chromoly steel blades and steerer - Rack eyelets for fenders and braze-ons for low-rider panniers
- 1 1/8" threadless steerer
- 350mm long steerer
- 44mm rake
- 400mm axle to crown
- 60mm inside width
- Lugged Cross fork to match Double Cross Cyclocross frames
- Lugged crown with Tange CrMo construction
- Features eyelets for front rack and braze-ons for low-rider panniers
$169.99
- Tange Infinity CrMo steel blades with D-shaped cross-section
- Fender eyelets at fork tips
- Low rider pannier rack boess
- Premium Cyclocross fork with CrMo blades
- Choose disc or cantilever brake options
- 300mm steerer (uncut) 30.0mm race 44mm straight rake fork
- Designed to match the Soma Double Cross disc frame
- Steerer 1-1/8" and 1", 350mm long, CrMo
- Axle to crown 400mm
- 44mm rake
$174.99
Odyssey's 41-Thermal forks quickly established a reputation for strength and quality when they originally introduced them in 1999, and they have since gone on to change the standards that all forks are judged by. The new R-Series forks continue this tradition.
FEATURES
- Fully redesigned.
- Laboratory tested and team proven.
- New, custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance.
- All-new steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race.
- New, optimized, 4mm dropout shape for grind and peg clearance.
- Updated 7075-T6 pre-load bolt
- Proven 41-Thermal® processed 4130 chromoly
- Legendary lifetime replacement warranty
SPECS
- 25mm traditional offset
- 3/8” axle slots only Starting at 1lb 15.2oz (885 grams)
$175.00
Like its QR cousin, the Disc Trucker Thru-Axle Fork is designed to mount racks and fenders and haul your worldly possessions. It's also got modern touches like dynamo routing, compatibility with flat-mount disc brakes, and three-pack mounts on both fork blades to satisfy your deepest cargo desires. Captured 12mm thru-axles make tool-free removal and installation possible. Offered in 26" and 700c wheel sizes, the Thru-Axle fork clears 26 x 2.1" or 700c x 47mm tires. With a 1-1/8" steerer, it's powder-coated and constructed using the same Chromoly steel as all our other frames and forks. Why? Because we swore a blood oath to steel and we intend to keep it.
Note: The Disc Trucker TA Fork is designed to pair best with second-generation Disc Trucker models—those first released in 2020. Defy this guidance at your own peril.
26 Inch
- Axle-to-crown: 376mm
- Offset: 45mm
- Steerer: 42–54cm frames = 300mm, 1-1/8" straight
- 56–62cm frames = 400mm, 1-1/8" straight
- Tire Clearance: 26 x 2.1" (with or without fenders)
700c
- Axle-to-crown: 390mm
- Offset: 45mm
- Steerer: 56–64cm frames = 350mm, 1-1/8" straight
- Tire Clearance: 700c x 47mm (with or without fenders)
$189.99
- Premium Cyclocross fork with CrMo blades
- 300mm steerer (uncut) 30.0mm race 44mm straight rake fork
- Designed to match the Soma Double Cross disc frame
- Designed for disc brakes, 160mm rotors (International mount)
- Straight blade design with D-shaped cross-section blades
- Tange Infinity CrMo steel
- 350mm 1-1/8" steerer
- 400mm axle to crown
- Two sets of fork-tip eyelets
- Low rider pannier rack eyelets
- 60mm inside width
$210.00 - $322.00
Premium performance at down-to-earth prices. Judy now includes all of the 30mm MTB and E-MTB forks, with axle and steerer options to match any spec. Silver level forks give you stiff steel upper tubes and TurnKey lockout.
Features
- New graphics package with E-MTB endorsement option (15x110mm)
- TurnKey lockout gives 'on/off' control
- Fits Tires up to 2.8" (15x110mm)
- Fast Black finished 30mm steel upper tubes couple stiffness and lightweight with a premium look
- Plush, highly tunable Solo Air spring
- Disc brake compatible
- Offset: 51mm (29-inches)
- Steerer Diameter: 1.5-inch Tapered
$249.95
The Ritchey Comp Carbon Road Fork was designed for how you love to ride. Built with High Modulus Fiber (HMF), this choice road fork offers superior strength. It's strong without sacrificing a pleasurable road feel. Smooth internal fiber flow in the crown/steerer area delivers the best force transfer from crown to shaft and increased impact strength. The orientation of the fibers have been optimized to absorb and dissipate loads, which delivers a confident and comfortable ride. The fork also uses various fiber types based on their specific properties to manage different load types as best as possible in the areas in which they occur, such as side load, torsion, and impact.
- Material: carbon blades / alloy steerer, crown, and dropouts
- Steerer length: 300mm
- Axle-crown: 368mm
- Rake/Offset: 43mm
- Crown diameter: 34mm (1") - 45mm (1-1/8")
- Spacing: 39mm
- Minimum tire clearance: 4mm
- Wheel compatibility: 700c
- Weight: 540g (with uncut steerer)
- Color: UD carbon finish (1-1/8") - 3K carbon finish (1")
$259.99
- Unicrown design with Tange Infinity CrMo steel tubing
- Single eyelets pannier rack mounts and mini rack mounts
- Fits 700c x 45mm tires with fenders
- 15x100mm thru axle and International Standard disc brake mount
$263.00 - $354.00
An entry level fork with the latest features and performance; Judy Silver is built around a brand new chassis derived from the Pike, works with Plus tires up to 2.8 in both the 27.5" and 29" models. Judy Silver features the Motion Control RL damper and is compatible with OneLoc remotes and has Fast Black upper tubes for an all-black look and low friction performance.
- 80-120mm travel
- External rebound
- TurnKey lockout controls
- Fast Black upper tubes
- Motion Control RL damper
- Compatible with OneLoc remote
$268.00 - $376.00
With optimized material concentrated at the brace and seal area, outstanding stiffness and steering precision, and new E-MTB configured fork options with fender mounting points, Recon Silver is an all-around performer suited for any MTB or E-MTB bike.
Features
- New E-MTB endorsement options with fender mounts are appropriate for all E-bikes (15x110mm version)
- New graphics are easy to read and make a fresh impact
- Motion Control damping featuring low-speed compression adjustment to lockout
- Fit Tires up to 2.8" (15x110mm version without fenders; the use of a full fender will reduce tire clearance)
- Fast Black finished 32mm steel upper tubes couple stiffness with a premium look
$269.99
Matching fork for the Soma Jawbone B-Type frame.
- Tange CrMo steel
- Fits QR hubs
- Axle to Crown: 425mm
- Rake: 50mm
- IS disc mounts, rotor fit up to 180mm
- Two sets of cargo cage bosses per leg, pannier rack bosses on inside and outside leg
- Two sets of fender/rack eyelets at fork ends
- 29" tire clearance: 2.25"
- 27.5" tire clearance: 2.8"
- 350mm Steerer Tube
If you are getting this fork for the Jawbone, you need a ZS44 headset.
Can be used as a rigid fork on some early 90's mountain bikes.
$279.00
The RockShox Paragon suspension fork combines the premium level of performance and features mountain bikers have come to expect from RockShox, now with a purpose-built 700c trekking design. Its lightweight, infinitely tunable Solo Air spring and Motion Control damper allow the rider to fine tune the fork for those cherished stretches of either path or pavement. Paragon’s thoughtful design combines a unique light mount on the fork brace and fender and rim/disc specific mounts integrated into the fork legs. Even the dynamo wiring runs under a sleek integrated cover up the fork leg, keeping it safe and concealed. Paragon makes trekking both smart and simple.
- Standard with Motion Control damping featuring low speed compression adjustment
- Integrated mounts for fenders
- Unique light integration at the fork brace
- Integrated wiring and cable management for running a dynamo
- Crown Race: 30mm
- Offset: 46mm
- Steerer Tube Length: 262mm
- Positive Spring: Air
- Negative Spring: Air
- External Adjustments: Rebound Damping , Low Speed Compression Damping
- Maximum Tire Width: 45mm
$289.99
- Tange Infinity CrMo steel fork for 27.5 (650b) or 29 MTB wheels
- Suspension corrected for 100mm travel 29er frames or 120-130mm 650b frames
- Unicrown with straight D-shaped blades International Standard disc mount
- 47mm rake
- Mini Rack Mounts
$299.00
The most iconic fork in the Columbus carbon range: clean, elegant lines, the Minimal is a monocoque carbon fork designed for frames with traditional steerers and satisfies a variety of rakes and steerer diameters.
The Minimal fork, in fact, is available both in a standard 1-1/8” diameter as well as in a 1” version, as well as the option of a traditional 45mm or 50 mm rake. Whether it’s a lugged or TIG welded frame, a standard geometry, or a frame designed for a small-statured rider, the Minimal fork offers a wide range of options, providing frame builders and riders with the best structural solutions and performance possible.
A Timeless model, the Minimal is adopted by classic traditional frame builders using standard tubing, as well as modern constructions using shaped and oriented tubes.
- T700S monocoque carbon fiber
- 300mm straight 1 or 1-1/8 carbon steerer
- Clearance for up to 25c tires
- 9x100mm aluminum dropouts
- 45mm rake
- 340g
$309.95
- Straight or tapered alloy steerer all road carbon fork
- Fender mounts and 6 fork eyelets for water bottles/bags
- Includes 12mm/15mm thru-axle on specific versions
- Tire clearance for 700x42c 700x40c w/fender or 650Bx50c road plus tires
- Steerer: 1 1/8" - 1 1/2" tapered or straight 1 1/8" available
- Uncut steerer tube length is 300mm
- Platform style racks for supporting randonneur style handlebar bags are okay, using the fork crown hole and lowest eyelet (just above the dropout)
- Not compatible with Tubus Tara, Salsa DownUnder, and other lowrider racks, the mounts are designed for light loading only
- Steerer tube expander plug not included
- 747g
- 45mm rake
$314.99
The Circus project started as a way to get our slopestyle riders into competition, but it wound up becoming an industry-leading dirt jump fork for riders all over the world. Circus has set the benchmark for everyday riders' jump session requirements and delivered podium results at pro-level competitions for almost a decade.
- Coil Spring
- ABS+ Compression Damping w/ Jump Stack
- Adjustable TPC Rebound Damping
- Absolute+ cartridge platform oil damping system: specifically tuned for Dirt Jumping
- 20mm hex axle provides superior torsional stiffness
- Forged I-beam style crown: bigger, stronger and more durable
- 1-1/8" threadless steel steerer and 32mm steel stanchions
- Can be reduced to 80mm travel with included spacers
$319.99
Omnium, scratch, pursuit, points, time-trial: from the inspiring Vigorelli Velodrome of Milan, the temple of international cycling and historical birthplace of the Columbus brand, the Pista Leggera is a fork that encompasses both the spiritual & performance attitudes that rode this famed track.
An oversized, heat-treated, CNC-machined aluminum head provides stability and precision and is seamlessly integrated with aerodynamic, high-modulus carbon-fiber blades. The Pista Leggera has a classic 35mm rake, providing enhanced responsiveness even in narrow and fast trajectories. Pista Leggera is the pinnacle of research and development at the Columbus Carbon Lab and is adopted by many professionals for their track frames. The Pista Leggera is also available in a caliper brake version, providing you with the possibility of mounting a brake during training sessions on public routes.
- T700 monocoque carbon fiber blades
- 300mm tapered aluminum steerer
- Clearance for up to 25c tires
- 9x100mm aluminum dropouts
- 35mm rake
- 560g
$329.95
With vibration-muting carbon blades, and alloy steerer and crown, the Comp carbon/alloy cross and road fork is ideal for cyclocross pursuits or road riding.
- Material: carbon blades / alloy steerer, crown, and dropouts
- 1-1/8" straight steerer
- Steerer length: 300mm
- Axle-crown: 391mm
- Rake/Offset: 48mm
- Crown diameter: 45mm (1-1/8")
- Spacing: 57mm
- Minimum tire clearance: 6mm
- Wheel compatibility: 700c
- Fender mounts
$329.99
All Box One forks are engineered and crafted using our Oversized Technology. These forks are the single most crucial component in the quest for bike control. We’ve moved carbon from areas of low stress to areas that handle high loads. Those muscular shoulders aren’t just for looks, as they are integral to achieving superior steering stiffness. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency.
Key differences: This particular model fork is tailored for mid-sized racers and includes a lighter weight 1 inch 7000 series aluminum steerer tube and 10mm cold-forged dropouts.
Weight Limit: 45 kg (99 lbs) or less with limitations as per Category 1 of EN 16054:2012 Standard
FEATURES
- 7075-T6 Aluminum Standard 1” Steerer Tube to Accommodate Mid-Sized Racers
- Designed for 10mm Axle Conventional Hubs
- Internal Butterfly for Added Durability at Steerer Tube and Fork Crown Interface
IMPORTANT NOTES
- Includes Box One™ Stem Lock
- Note: Use of a star nut voids the warranty for this product.
COMPATIBILITY
- Box One Stem Spacers
- Box Two Stem Spacers
- Box Two Threadless Headset
- Box Two 1" Integrated Headset
- Box Two 1" Integrated Conversion Headset
- Box Two Headset Adapters
- Box Two Top Load 1" Stem
- Box Hex Lab 1" Stem
- Box Two Center Clamp 1" Stem
Page 1 of 4
Next page