Filter By:
- Bar Ends (13)
- BMX (52)
- Bottom Brackets (207)
- Brakes/Levers/Pads (604)
- Cables (166)
- Cassettes/Freewheels (133)
- Chainrings (258)
- Chains (137)
- Show More Categories
- Cranksets (259)
- Derailleurs (155)
- Forks (134)
- Groups (27)
- Handlebar Grips/Tape (300)
- Handlebars (236)
- Headsets (177)
- Pedals (341)
- Saddles (316)
- Seatposts (105)
- Shift/Brake Combinations (62)
- Shifters (132)
- Shocks (39)
- Stems (138)
- Other (2104)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts

$48.95
e*thirteen's Base pedal features a durable composite pedal body and 22 traction pins.
- Durable composite pedal body
- 22 traction pins
- 9/16"

$56.99
Zipp's Service Course Stem is strong, light, and reliable. Forged of 7075 aluminum with stainless steel bolts, the Service Course is stiff enough to harness the power of your burliest sprints and withstand the jarring forces of the meanest potholes. It keeps the front end completely rigid, providing control no matter the condition.

$199.99
The X-Fusion Manic post uses internal cable routing and was designed around a low-profile seat cradle and seal collar to fit a broad range of frames. The mechanism is air-sprung and hydraulically locked. The remote can be run on the left or right, above or below the handlebar, but is optimized as a left shifter replacement for 1x drivetrains.
- Cable activated, hydraulic action, infinitely adjustable travel
- Double key-way design prevents lateral twisting
- Double bolt clamp with a wide range of seat angle adjustment. Fits both standard and 7 x 9 mm Carbon Rails
- Sealed cartridge internals for quick replacement
- Low profile head-seal and saddle clamp increase useable travel

$83.95 - $94.95
Wolf Tooth was first to market with Cyclocross 1x specific chainrings because we saw Cyclocross as the perfect use for our patent pending Drop-Stop technology. These beautifully machined 110 BCD Asymmetric 4-bolt chainrings are optimized for your 1x Shimano CX/ Road/ Gravel drivetrain whether you run Dura Ace 9000, Ultegra 6800, 105 5800, or Tiagra 4700. They are also offset for the ideal 1x chainline. Compatibility: - These rings are for use with 110 BCD Asymmetric 4-bolt cranks. - Compatible with Dura Ace 9000, Ultegra 6800, 105 5800, Tiagra 4703, and Tiagra 4700 - Sizes 38T and larger are compatible with Dura Ace 9100, Ultegra 8000 and 105 R7000 but a slight modification is required due to a change in the crank arm profile. The 36T chainring will not work for this modification. - Mounts in the big ring position of the cranks but is offset inward for perfect chainline. - The stock 2x bolts will not work. You will need 6mm bolts which are optimized for single ring mounting. - For 1x9, 1x10, 1x11 and 1x12 drivetrains including SRAM Eagle (TM) - Compatible with all 10, 11, and 12 speed chains including SRAM Eagle (TM) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention).

$79.95 - $89.95
The perfect 1x solution for your gravel, CX or road bike. Made from 7075 Aluminum, Wolf Tooth's patented Drop-Stop design helps clear mud while retaining your chain.
- Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention
- Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains
- Drop-Stop FT is compatible with all 10-, 11-, and 12-speed chains (including SRAM Flattop 12-speed chains), with the exception of Shimano 12-speed chains
- Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings
- If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention
- Not compatible with Shimano Asymmetric 110 BCD cranks or Campagnolo CX10/11 cranks
- Use of a clutch-style rear derailleur is recommended
- Made from 7075-T6 aluminum for long life

$76.95
Wolf Tooth's SDM chainrings replace your existing spider and chainring with one clean looking, light weight, and stiff piece of machined billet. These come in 3 different offsets: standard GXP, Boost and BB30.
Compatibility:
- These direct mount chainrings will replace your existing chainring and spider, which is attached via 3 bolts on the back side of the spider near the spindle. You will use these same 3 bolts to attach the Wolf Tooth SDM chainring.
There are 3 offsets: 0mm, 3mm, and 6mm
- 49mm chainline, 0mm offset for BB30 short-spindle cranks
- 52mm chainline, 3mm offset BB30
- 47mm chainline, 6mm offset for cyclocross and road cranks
- 49mm chainline, 6mm offset for GXP and long spindle BB30 Boost
Notes for use with Fat Bikes:
- If you are planning to use this on an X9 or XX1 fat bike crankset with a 190/197 rear hub spacing use the 0 offset ring.
- If your fat bike has a 170/177 rear hub spacing, use the Standard 6mm offset

$64.95
Designed to fit any 96 Symmetric BCD Shimano Cranksets. These rings feature the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention.
- Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention
- Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains
- Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains
- Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings
- If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention
- Made from 7075-T6 aluminum for long life
- Chainline is 49mm
- Chainrings are threaded for standard M8 chainring bolts for no-nut installation

$64.95
Wolf Tooth Premium headsets are machined out of aircraft grade aluminum and feature high-end bearings made by Enduro. They are engineered to use the largest possible ball size and are filled with high-pressure waterproof lubricant. A pair of dual-lip seals ride in micro-grooves to keep out water and debris.
Stainless Steel Bearings provide unparalleled corrosion resistance
Highly recommended if your headset will be exposed to wet conditions or sweat
Lifetime warranty

$54.95
Wolf Tooth Premium headsets are machined out of aircraft grade aluminum and feature high-end bearings made by Enduro. They are engineered to use the largest possible ball size and are filled with high-pressure waterproof lubricant. A pair of dual-lip seals ride in micro-grooves to keep out water and debris.
- Stainless Steel Bearings provide unparalleled corrosion resistance
- Highly recommended if your headset will be exposed to wet conditions or sweat
- Lifetime warranty

$119.95
Built out of 416 Stainless Steel, these rings are designed to last and feature extreme durability. These rings feature Drop-Stop tooth profiles for mud clearance, chain retention and durability.
- Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention
- Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains
- Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains
- Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings
- If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention
- Durable 416 stainless steel construction makes this chainring last 5-10x longer than an aluminum chainring
- Use of a clutch-style rear derailleur is recommended

$79.95 - $91.95
Designed to fit Shimano GRX 4-bolt 110 Asymmetric BCD cranksets. The design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the benefits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. These rings feature Wolf Tooth's Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention.
- Compatible with Shimano GRX cranksets including RX600 and RX810
- The Powertrac elliptical design means the diameter is that of a chainring 2t bigger
- Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains
- Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains
- Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings
- If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention
- Use of a clutch-style rear derailleur is recommended
- Made from 7075-T6 aluminum for long life

$81.95
The direct mount chainrings for SRAM cranksets replace your existing spider and chainring with one clean-looking, lightweight, and stiff piece of machined billet. Wolf Tooth patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability.
More power? Check. Better traction? Definitely. Less shifting? Yup. Funky uneven pedal stroke? Not with Wolf Tooth PowerTrac Elliptical (PTE) chainrings. Our proprietary design means a slightly less ovalized ring (10%) with less aggressive timing (112 degree) than competitors versions; any change to your pedal stroke is unnoticeable for most riders, but they still provide the POWER and TRACTION benefits inherent to oval chainrings.
Wolf Tooth patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability.
Compatibility
These direct mount chainrings will replace your existing chainring and spider or replace the direct mount ring on SRAM cranksets including the DUB cranks. The ring is attached via 3 bolts on the back side of the spider near the spindle. Note that the SRAM 12spd Red and Force AXS use a different 8-bolt mounting interface that is not compatible with these chainrings.
Specifications:
- Boost: 3mm offset for 52mm chainline
- Mount type: Direct Mount for SRAM
- Offset: Boost
- Chain Compatibility: Drop-Stop A tooth profile for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains

$81.95
More power? Check. Better traction? Definitely. Less shifting? Yup. Funky uneven pedal stroke? Not with Wolf Tooth PowerTrac Elliptical (PTE) chainrings. Our proprietary design means a slightly less ovalized ring (10%) with less aggressive timing (112 degree) than competitors versions; any change to your pedal stroke is unnoticeable for most riders, but they still provide the POWER and TRACTION benefits inherent to oval chainrings.
Wolf Tooth patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability.
Compatibility:
- Any Race Face Cinch system crankset (including Next SL, Sixc, Turbine, Aeffect)
- Both standard (142mm rear hub spacing) and Boost (148mm hub spacing) offsets available.
- For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle)
- If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).
- Maximum diameter is that of a chainring 2t bigger than the size you order (so be sure there is adequate chainstay clearance!)
- Chainline 49mm (standard), 52mm (Boost)
Specifications:
- Mount type: Direct Mount for Race Face Cinch
- Chain Compatibility: Drop-Stop A tooth profile for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains

$79.95
Designed to fit SRAM cranksets with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings.
- Elliptical rings provide smoother, more efficient pedal rotation, which means better traction
- Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains
- Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains
- Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings
- If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention
- Not compatible with the SRAM RED and Force AXS 8-bolt interface
- Made from 7075-T6 aluminum for long life
- Use of a clutch-style rear derailleur is recommended
- 0mm offset is designed for BB30 short spindle cranks (49mm chainline)

$26.95
Fat Paw grips were developed for riders who crave large-diameter grips that also have a soft feel. The 9.5mm grip thickness reduces hand fatigue and finger numbness, making it an ideal option for riders with large or gloved hands.
- 100% proprietary dual-density silicone compound provides excellent vibration damping and conforms to your hand for improved comfort while maintaining durability
- Tacky texture provides excellent grip with or without gloves in all weather conditions
- Includes bar end plugs

$39.95
Wolf Tooth Supple handlebar tape is extra thick, extra wide, extra soft, and extra tacky. Designed for the abuse of unforgiving trails. The 40mm wide tape can be tuned for additional thickness by wrapping with increased overlap.
- Washable surface is resistant to wear and packing out
- 5mm thick, 100% silicone is washable, resistant to wear and packing out
- Self-fusing silicone finishing tape included for a clean finishing touch
- Length: 152cm

$39.95
Wolf Tooth Supple handlebar tape is extra-thick, extra-wide, extra-soft, and extra-tacky. Designed for the abuse of unforgiving trails, the 40mm wide tape can be tuned for additional thickness by wrapping with increased overlap.
- 5mm thick, 100% silicone is washable, resistant to wear and packing out
- Self-fusing silicone finishing tape included for a clean finishing touch

$15.95
Wolf Tooth CenterLock Rotor Lockrings for securing centerlock rotors to centerlock hubs. Machined from 7075-T6 aluminum at Wolf Tooth in Minnesota, USA.
- Compatible with 12mm, 15mm and 20mm thru axles and QR
- Machined 7075-T6 aluminum
- Durable anodized finish
- Torque to 40Nm
- Not compatible with 6-bolt rotors and hubs
- Washer included

$36.95
The Wolf Tooth Quick Release Seatpost Clamp allows for easy saddle height adjustments. An ergonomic lever on the side of the clamp opens and closes the clamp, which is held together by a bolt with a bronze bushing that lets the rider set the torque. It is friendly with carbon, steel, alloy, and titanium frames.
- Bronze bushing for smooth lever action
- Low-profile ergonomic lever
- Stainless steel bolt with spherical washer
- CNC machined 6061-T6 aluminum

$29.95
The Wolf Tooth Post To Flat Mount Brake Adapter allows flat mount brakes to be added to a frame or fork that was designed for post mount brakes. This is a vital component for cyclists who want to run a road groupset on a mountain bike frame.
- Please note that this is a +20mm adapter, which means a 140mm post mount native size will only work with a 160mm rotor, just as a 160mm post mount native size will only work with a 180mm rotor, and so on
- Fits on post mount native sizes 140, 160, and 180mm
- Works with rotor sizes 160, 180, and 200mm
- Tested with SRAM and Shimano brakes
- Requires minimum 13mm between top of brake boss to frame/fork
- CNC Machined from 6061-T6 aluminum for strength and light weight
- Includes : (2x) M5x13mm Flat Head bolts for Flat Mount Caliper and (2x) M6x15mm Socket Head bolts for Post Mount

$69.95
ReMote Dropper Lever
- Lever pivots on a 21mm ball bearing for smooth operation
- Cable Kind Clamp does not damage secured cables and features captive hardware.
- Includes barrel adjuster for on the fly changes
- Engineered break-away pivot that allows the lever to break away from the pivot in the event of a crash.

$64.95
Wolf Tooth ReMote Light Action has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote. Based on rider feedback and tailored to work with some posts' stiffer internal springs, the ReMote Light Action is also the choice of those with thumb injuries or reduced hand strength.
- Upfront cable fixing
- Large diameter ball bearing
- Cable-kind clamp
- Low-profile, light action
- Integrated cable adjust
- Breakaway axle pivot
- High-traction lever
- Broad compatibility

$69.95
The Wolf Tooth ReMote Pro is the most adjustable and refined dropper lever. It can be moved laterally along the handlebar and rotated around the handlebar as can be done with all dropper levers, while also allowing for 48 deg of rotation to set the lever starting point, independent of cable tension – no other dropper lever allows for this to be adjusted. ReMote Pro also has a cable pulley with a cam (oval) shape that provides more leverage at the beginning of the lever throw; this is when dropper posts need more force to open the fluid reservoir valve that allows the post to move. And just like other Wolf Tooth dropper levers, ReMote Pro features a large sealed custom bearing and is machined at Wolf Tooth in Minnesota, USA.
- Machined surface of paddle provides extra grip
- 6061 T6 aluminum construction with Delrin axle
- Large sealed cartridge bearing is shielded from the elements
- Stainless steel bolts for unprecedented adjustability
- Cable clamp won’t pinch or bend cable
- Integrated barrel adjuster is the only plastic component
- Compatible with all cable-actuated dropper posts
- Various clamp options to integrate with brakes from popular manufacturers

$21.95
Roadlink Rear Derailleur Part
- The RoadLink is optimized for use with ten or eleven-speed 11-36t and 11-40t cassettes
- 11-42 or 10-42 setups are not supported
- Works with all 10-11 speed Shimano and SRAM Road Derailleurs
- Best used with Single or Double Setups - see manufacturer's site for more details

$144.53
Threaded Angular Contact BB for 386EVO frames (86.5mm shell width, 46mm shell ID). Machined cups thread together for stability, increased bearing life, and simple installation and maintenance. No more creaking. Smooth operation. Fast bearing replacement. - Bearings: Enduro Angular Contact - Color: Black - Bottom Bracket/Frame Interface: BB386EVO - Bottom Bracket Shell Width (mm): 86.5mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: BB30 - Crank Spindle Diameter: 30mm - Weight: 124g - Packaged for retail display - Will accept 24mm and 24/22mm cranksets using Wheels Mfg. 386EVO BB / Crank Adapters

$64.05
Wheels Manufacturing BB30 Bottom Bracket Adaptor for GXP Cranks adapts 22/24mm Spindle Cranks (SRAM/TruVativ) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.

$68.25
BB30 service kit includes (2) Enduro 6806 ABEC-5 Angular Contact sealed bearings and 2 retaining clips. - Bearing Dimensions: OD: 42mm / ID: 30mm / Width: 7mm - Direct replacement bearing for OEM BB30 and BB30A systems

$118.99
BBRight™ Outboard bottom bracket for use with 24mm spindle diameter cranksets. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: BBRight™ Press Fit - Bottom Bracket Shell Width (mm): 79mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 148g

$74.00 - $118.65
The Wheels Mfg PF30 Outboard bottom bracket will give you all of the same benefits as their well-loved Outboard style BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 24mm spindle diameter cranks (Shimano, FSA, Etc.) in PF30 frames without the need for adapters. - Bearings: Enduro ABEC-3 - Color: Red - Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 161g
Page 1 of 200
Next page